The maximum power of the PV is twice the rated power. It supports full-power charging and full-power load operation.
Choose between a 65K-color HD touch screen and a segmented code screen. Supports global language customization.
It is possible to set the charging and discharging time periods according to the time-of-use electricity price.
It has the function of connecting to the power grid, which effectively improves the energy utilization efficiency.
It is equipped with a dimensional upgrade driving function, enabling a larger load power capacity and support for a wider variety of loads.
It adopts an advanced inverter architecture, which can reliably suppress leakage current and ensure electrical safety.
It can provide bypass output even without a battery, ensuring continuous power supply to critical loads.
It is compatible with lead-acid batteries, lithium batteries, gel batteries, etc.
It has a battery activation function.
Both the AC input port and the generator interface can be connected to the PV grid-connected inverter for renovating the original PV system.
| MODEL | HS2085UH48L | HS2105UH48L/P | HS2114UH48L/P | HS2120UH48L |
| Battery Voltage | 40~60Vdc | |||
| Battery Type | Lead-acid, lithium batteries, gel batteries, etc | |||
| Output | ||||
| Rated Output Power | 8500W | 10500W | 11400W | 12000W |
| Parallel Function | N/A | L:N/A ；P: Yes, up to 10 units | L:N/A ；P: Yes, up to 10 units | N/A |
| Rated Output Voltage | 120/240Vac | |||
| Rated Output Frequency | 50/60Hz Intelligent adaptive/configurable | |||
| Output Waveform | Pure sine wave | |||
| Max Efficiency(Peak) | 92% | |||
| Rated Current | 35.4A | 43.7A | 47.5A | 50.0A |
| Transfer Time | 10ms(Typical value) | |||
| PV Input | ||||
| Max Input Power | 6000W+6000W | 7500W+7500W | 7500W+7500W | 7500W+7500W |
| MPPT Voltage Range | 90~500Vdc | |||
| Max Input Voltage | 500Vdc | |||
| Max Charging Current | 180A±5A | 200A±5A | 200A±5A | 200A±5A |
| Mains/ Generator Input | ||||
| Max Charging Current | 100A | 120A | 120A | 120A |
| Nominal input voltage | 120~240Vac,±2% | |||
| AC Input Voltage Range | 90Vac（L~N）~140Vac（L~N）,180Vac（L~L）~280Vac（L~L） | |||
| Rated Frequency | (47-55Hz) ±0.3 / (57-65Hz) ±0.3 | |||
| Battery Input | ||||
| Voltage Range | 40-60V | |||
| Max Charging Current | 180±5A | 200±5A | 200±5A | 200±5A |
| General Parameters | ||||
| Dimension. W*D*H(mm) | 620*140*465 | |||
| Installation Method | Wall-mounted | |||
| Weight (kg) | 26 | |||
| Communication Mode | RS485/CAN Optional WIFI/4G | |||
| Protection function | Over/Under Voltage Protection、Over/Under Frequency Protection、AC Output Short Circuit Protection、AC Output Overload Protection、High/Low Temp Protection、PV Reverse Connection Alarm | |||
| Operating Environment | ||||
| Operating Ambient Temperature | -25℃~60℃(＞45℃ Derating ) | |||
| Storage Ambient Temperature | -20°C~60°C | |||
| Humidity | 5%~95% Non-condensation | |||
| Altitude | 4000m(＞2000m Derating） | |||
| Protection Degree | IP20（For indoor use only） | |||
| Certifications | ||||
| Certification | FCC、UL | |||
| Certifications standard | FCC 47 CFR Part 15、UL1741、TSCA、CA65 | |||
Specifications are subject to change without advance notice.
Scenarios of no power, lack of power, power instability area, no motor and other impact load scene
