The maximum power of the PV is twice the rated power.
It can provide bypass output even without a battery, ensuring continuous power supply to critical loads.
It has the function of connecting to the power grid, which effectively improves the energy utilization efficiency.
It is equipped with a dimensional upgrade driving function, enabling a larger load power capacity and support for a wider variety of loads.
It adopts an advanced inverter architecture, which can reliably suppress leakage current and ensure electrical safety.
Modular stacking design, plug and play, convenient installation.
Modular battery pack, supporting battery expansion, up to 76.8kWh.
It has a battery activation function.
| MODEL | HS1055EH48L-5H | HS1055EH48L-10H | HS1055EH48L-15H | HS1055EH48L-20H |
|---|---|---|---|---|
| Output | ||||
| Rated Output Power | 5500VA/5000W | |||
| Rated Output Voltage | 230Vac±4% | |||
| Rated Output Frequency | 50/60Hz±0.3(Adaptive) | |||
| Output Waveform | Pure sine wave | |||
| Efficiency(Peak) | 93.8% | |||
| Rated Current | 22A | |||
| Transfer Time | 10ms(Typical value) | |||
| Mains/ Generator Input | ||||
| Rated Input Voltage | 220/230Vac | |||
| Frequency Range | (47-55Hz) ±0.3 / (57-65Hz) ±0.3 | |||
| Max Charging Current | 60A | |||
| AC Input Voltage Range (UPS mode) | 170Vac~280Vac ±2% | |||
| Battery | ||||
| Battery Type | LiFePO4 | |||
| Battery Rated Voltage | 51.2V（16S） | |||
| Battery Energy | 5.12KWh | 10.24KWh | 15.36KWh | 20.48KWh |
| Battery Capacity | 100Ah | 200Ah | 300Ah | 400Ah |
| Max Charing/Discharing Current | 100A | |||
| DOD | 80% | |||
| Designed Life-span | 6000 cycles to 80+% capacity | |||
| PV Input | ||||
| Max Input Power | 5500W | |||
| Max PV Open-circuit Voltage | 500Vdc | |||
| MPPT Voltage Range | 90~500Vdc | |||
| Max PV Input Current | 20A | |||
| Max PV Charing Current | 100A | |||
| General Parameters | ||||
| Dimension. W*D*H(mm) | 650*460*410 | 650*460*560 | 650*460*710 | 650*460*860 |
| Weight (kg) | 76kg | 124kg | 172kg | 219kg |
| Communication Mode | RS485/Dry contact control，Optional WIFI/GPRS/4G | |||
| Protection function | Over/Under Voltage Protection、Over/Under Frequency Protection、AC Output Short Circuit Protection、AC Output Overload Protection、High/Low Temp Protection、PV Reverse Connection Alarm | |||
| Operating Environment | ||||
| Operating Ambient Temperature | -25℃~60℃(＞45℃ Derating ) | |||
| Humidity | 5%~95% Non-condensation | |||
| Operating Environment | Indoor | |||
| Certifications | ||||
| Certification | CE 、RoHS | |||
| Certifications standard | IEC/EN 61000-6-1/3 、EN 62920 、IEC 62109-1、IEC 62109-2、IEC 62321 | |||
| Transport certification | UN38.3、MSDS | |||
Specifications are subject to change without advance notice.
Scenarios of no power, lack of power, power instability area, no motor and other impact load scene
Our Household Energy Storage System is designed with advanced safety protections, ensuring stable and secure operation. It includes safeguards against short circuits, under-voltage, overload, anti-reflux, and PV anti-reverse connections, providing peace of mind and long-lasting reliability.
Mains Priority: Ensures continuous power supply from the grid when needed.
Photovoltaic (PV) Priority: Maximizes solar energy usage for cost savings.
Hybrid Charging: Combines grid and solar power for efficient charging.
Solar-Only Mode: Operates entirely on solar energy for eco-friendly performance.
Equipped with an integrated MPPT controller, this system achieves up to 99.9% efficiency, ensuring optimal solar power conversion and utilization. By maximizing energy yield, it reduces dependence on the grid and lowers electricity costs.
Smart energy management for homes and businesses
Uninterrupted power supply with automatic switching
Enhanced battery life with intelligent charging control
Eco-friendly solution that reduces carbon footprint
Maintaining your household energy storage system (HESS) properly ensures its efficiency, longevity, and safety.
Check battery health: Use the battery management system (BMS) to monitor charge cycles, voltage levels, and capacity.
Inspect for damage: Look for physical damage, corrosion, or leaks in battery connections.
Monitor performance: Track charging/discharging efficiency and energy output to detect any irregularities.
Dust and debris removal: Clean the battery housing and inverter to prevent overheating.
Ensure proper ventilation: Prevent overheating by keeping vents clear and maintaining airflow around the system.
Avoid extreme temperatures: Keep the system within its recommended operating range (typically 10°C to 30°C for lithium-ion batteries).
Prevent moisture buildup: Use a dehumidifier if installed in a humid location.
Avoid overcharging & deep discharges: Lithium-ion batteries should ideally stay between 20-80% charge for longevity.
Set proper charging limits: Use manufacturer-recommended settings for depth of discharge (DoD).
Email: sunohoo_hn@sunorensolar.com
Phone: 86-573-87393188
Website: sunohootech.com
Model number
Serial number
Purchase date
Description of the issue
We are committed to providing you with the best possible support for your Household Energy Storage System. Thank you for choosing our product!
